Quantum-data 881 Manual do Utilizador descarregar pdf (Página 37)

881/882 Video Test Generator User Guide (Rev A.22) 19

5. Select a format by pressing the adjacent soft key. The format path is now set to the

selected folder on the selected medium.

To set the generator’s path using the command line interface:

1. Establish a session with the generator using either HyperTerminal over a serial

connection or Telnet over an Ethernet LAN. See “Establishing a terminal session with

the generator” on page 31 or “Establishing a Telnet session with the generator” on page

34.

2. For each file type (format, image, and sequence), set the path parameter to the

corresponding folder on the desired medium. In the command syntax, specify the

medium as follows:

• Flash memory: tffs0 (TFFS - Transaction Flash File System)

• PC card: card0

• File server: <server name>

3. For each file type (format, image, and sequence), set the path parameter to the

corresponding folder on local generator media using the following commands:

FMTP /medium/Library/Formats

IMGP /medium/Library/Images

SEQP /medium/Library/Sequences

For example the medium name for the PC card is /card0. So you would enter the

following command to set the image path to the image directory on the PC card:

IMGP /card0/Library/Images

The generator will now display the images on the PC card when you press the

Contents key.

The medium name for the flash memory is /tffs0. So you would enter the following

command to set the image path to the format directory on the flash memory:

FMTP /tffs0/Library/Formats

The generator will now display the formats on the flash memory when you press the

Source key.

The medium name for the network is the server (host name) memory. So you would

enter the following command to set the image path to the format directory on the flash

memory:

SEQP /Server030/Library/Sequences

The generator will now display the sequences on the server when you press the Tools

key and then select sequences.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 125 126

Sem comentários

Quantum-data 881 Manual do Utilizador Página 37